European Journal of Prosthodontics and Restorative Dentistry

cover art

Cover Date:
March 2008
Print ISSN:
0965-7452
Vol:
16
Issue:
1

Effect of Artificial Accelerated Aging on Color Stability and Surface Roughness of Indirect Composites

Abstract - Direct and indirect composite resins have different forms of polymerization. Some materials require a postcure system associating light and heat enhancing clinical properties. This study assessed the changes in color and surface roughness of three indirect composite resins after accelerated aging. Twelve specimens (15x2mm) were obtained for each tested material. Subsequently, the first measurements for roughness tests and colorimetric spectrophotometry (CIE L*a*b* scale) were performed. Specimens were subject to accelerated aging for 384 hours. New measurements were then performed to evaluate the resulting change. Accelerated aging produced color change and increased surface roughness in all composite resins. Solidex® resin showed color changes above the clinically accepted value (∆E = 4.31±0.22), and roughness values (Ra= 0.088±0,008 µm) statistically lower than that of Artglass® (Ra=0.141±0.026 µm) and Targis® (Ra=0.124±0.02 µm) (p<0.001). All the indirect resins tested showed color change and increased roughness after accelerated aging. Solidex® showed color stability above a quantitative level considered clinically acceptable and lower roughness values compared to the other resins.

KEY WORDS: Material aging, Artificial aging, Colour stability, Surface roughness, Ceromers

Article Price
£15.00
Institution Article Price
£
Page Start
10
Page End
14
Authors
Fabíola Rejane Zanin, Lucas da Fonseca Roberti Garcia, Luciana Assirati Casemiro, Fernanda de Carvalho Panzeri Pires-de-Souza

Articles from this issue

  • Title
  • Pg. Start
  • Pg. End

  1. An Update on Resin-Bonded Bridges
  2. 2
  3. 9

  1. Effect of Artificial Accelerated Aging on Color Stability and Surface Roughness of Indirect Composites
  2. 10
  3. 14

  1. Polymerization Eficiency of Dual-polymerized Resin Cements Light- Irradiated Through Ceramics and Laboratory-processed Resin Composite*
  2. 15
  3. 19

  1. Case Report of Multiple Implant Failure in a Patient with Ankylosing Spondylitis
  2. 20
  3. 23

  1. The Evidence Base for Current Practices in Prosthodontics
  2. 24
  3. 36

  1. Bond Strength of Luting Materials to Ceramic Crowns after Different Surface Treatments.
  2. 35
  3. 38

  1. Polymerisation Shrinkage of Luting Agents for Crown and Bridge Cementation
  2. 39
  3. 44

  1. Hybrid type Anterior Fibre-reinforced Composite Resin Prosthesis: A Case Report
  2. 45
  3. 47